User Manual

Stay warm, work efficiently, and experience the difference.

USER MANUAL

Step one: Choose your desired setting by turning the knob to either the 8-hour extra-high heat or 12-hour high heat option.

​

Step two: The light will flash to remind you to clean the burner located inside the heater. Ensure it's cleaned every day before using the heater. We'll show you how visually. Step three: After cleaning the burner, press the orange button to proceed.

​

Step four: Pour your choice of igniter fuel into the burner. We recommend adding 100 milliliters of diesel fuel or a handful of sawdust mixed with used motor oil and diesel fuel.

Step five: Next, ignite the burner and make sure to close the door. From this point on, everything is automatic. The Electronic Feeding System will begin feeding the fire with used motor oil from the deposit tank below. This may take 3 to 6 minutes, depending on factors like the oil's temperature. When you're done using the Eco Fuego Heater, you have two options. You can manually shut off the heater, or it will automatically turn off after 8 or 12 hours, depending on the setting you chose. After shutting off, the heater will automatically go through a cooling-off process to ensure safety.